Ingersoll Rand Oil Filter 39911631

Physical Dimensions & Architecture
Overall Height: 28.2 cm to 29.9 cm (~11.1 to 11.7 inches) depending on outer shell casing tolerances.
Outer Diameter (OD): 11.8 cm to 12.1 cm (~4.64 to 4.76 inches).
Thread Pitch/Specification: 1 3/4″ – 12 UN Female internal bottom connection (A robust, large-profile industrial thread engineered to handle high fluid flow).
Internal Seal/Gasket: Nitrile (NBR) or Viton-based rubber formulation engineered specifically for synthetic polyglycol compressor coolants.
Net Weight: ~1.62 kg to 2.08 kg (~3.5 to 4.5 lbs)

Prices are changeable. Please contact us before placing your order:

Phone/WhatsApp: +8801316563872

Description

Specification

Product name:	oil air separator 39911631
Oil Content:	3-6ppm
Filtration Efficiency:	99.99%
Max working temperature:	120℃
Recommended time:	3500-4000h
Application:	For industrial compressed air oil separator
Material:	Imported Material

Operating & Filtration Specs

Filter Media: Pleated wire-backed synthetic micro-glass or inorganic fiber layers with deep-pleat geometry for maximum dirt-holding capacity.
Filtration Rating: Captured at 10 to 12 microns nominal.
Continuous Working Pressure: Rated up to 25 bar (~362 PSI).
Maximum Shell Burst Pressure: Rated up to 54 bar (~783 PSI).
Structural Collapse Resistance: Minimum element structural collapse limit of 15 bar

Reviews

There are no reviews yet.

Be the first to review “Ingersoll Rand Oil Filter 39911631”

You must be logged in to post a review.